CHESS SUBSEA ENGINEERING FOUR (4) MONTHS CADDAS ENGINEERING DETAILED & FEED DESIGN AND SIMULATION CERTIFICATION PROGRAMME NIGERIA – ONSHORE, OFFSHORE, PIPELINE, SUBSEA & HYDRODYNAMICS – (ONLINE & OFFLINE)
Chess Subsea Engineering Limited, a UK based surface, marine & naval architecture, hydrodynamics & subsea production systems engineering consultancy and research & development company with extensive experience with Floating Production Storage & Offloading (FPSO) unit, Jack-up, Drilling Units, Drillships, Risers and Pipelines is set to train & certify Nigerian 
graduates and working professionals changing careers intensively within four months (4) in the areas of Pipelines, Onshore & Offshore Topsides Structures, Subsea & Hydrodynamics Engineering using modern Computer Aided Design, Drafting, Analysis & Simulations (CADDAS) software’s with focus on onshore, deep and shallow water project. This four (4) months intensive engineering CADDAS programme has been fully subsidized and offered in accordance to Nigerian Local Content and Department of Petroleum Resources (DPR PERMIT NO: DPR/OGISP/18/4241800/N144618) requirements on engineering training and manpower development indigenously.
Click here to download full CADDAS Programme Nigeria course modules.
PURPOSE
To develop the highly specialized skills and knowledge in the areas of Offshore & Subsea Engineering Procurement Installation & Construction (OSEPIC). This online or offline CADDAS programme is structured for engineers from any disciplines who intend switching careers and working as subsea pipeline engineers, subsea systems design engineers, subsea reliability engineers, subsea integrity engineers, offshore engineers, offshore project managers & offshore supervisors for local or international offshore and subsea contractors or IOC’s globally.
OBJECTIVE
Objective of the programme is to enable participant to support deep and shallow water assets with minimum supervision for all deepwater diving operations & subsea related activities including:
- Conducting proactive surveillance of subsea equipment from data interrogated from surveillance tools and presenting insights on performance in addition to identifying opportunities to enhance existing operations
- Troubleshooting subsea flow assurance, control systems issues as and when they arise
- Developing subsea inspection plans and supporting execution of survey activities for subsea equipment
- Analyzing inspection results and conducting fitness for service assessment to ensure integrity of the subsea equipment
- Participating in, or leading various safety studies/activities such as: PHAs, HAZOPS, JSAs and incident investigations for marine systems
- Supporting maintenance of subsea equipment spares inventory and subsea tooling.
- Interfacing with diverse groups including vendors and operations/maintenance technicians on subsea related issues
- Providing technical leadership on all subsea-related issues.
CAREER OBJECTIVES
At the end of the programme participant will be able to function with minimum supervision for IOCs, subsea pipeline company contractor, vendor or installation as a subsea pipeline engineers, subsea systems design engineers, subsea reliability engineers, subsea integrity engineers, offshore engineers, offshore project managers & offshore supervisors
CADDAS Programme is a programme structured to bridge the needed knowledge gap at beginners to intermediate level and gain mastering.
Click here to download full CADDAS programme course modules for engineers and diploma holders.
TRAINING MODE:
ONLINE | OFFLINE (IN HOUSE) – (PORTHARCOURT ONLY)
No 5 Ken Saro Wiwa Street, Off Rumoula Link Road, Rivers State, Portharcourt, Nigeria
NB: Training at clients office within Nigeria also available for minimum of eight (8) staffs
IN HOUSE & OFFLINE TRAINING MODE:
Two (2) days intensive training followed by practical intensive real time engineering design case study as project. Competence to be accessed weekly globally online and offline.
COURSE TRAINING DATES
Contact us directly to confirm course scheduled date
4 MONTHS PROGRAMME OUTLINE
CADDAS 001: Oil & Gas, Offshore, Subsea & AutoCAD 2D Engineering Master Class
WK1 – WK2: Course Modules
- Module 1: Introduction to Oil & Gas Engineering
- Module 2a: Introduction to Offshore Structures Engineering
- Module 2b: Fundamentals of Floating Production Storage and Offloading (FPSO) Unit Engineering Design Architecture
- Module 3: Fundamentals of Subsea Engineering
- Module 4: Offshore Hydrography & Site Investigation
- Module 5: Subsea Surveys System Positioning & Metrology
- Module 6: Fundamentals of 2D Drafting Overview with AutoCAD
Click here to download course modules
CADDAS 002: 3D Modeling of Onshore, Offshore & Subsea Engineering Design Master Class with AutoDESK Inventor
W3 – Wk4: Course Modules 
- Module 1: 3D Modelling Overview with AutoDESK Inventor
Technical Workshops
- CADDAS 002a Case Study: Creation of 2D & 3D Engineering Component Parts with AutoDESK Inventor
- CADDAS 002b Case Study: 3D Components Assembling with AutoDESK Inventor
- CADDAS 002c Case Study: Creation of Annotated Drawing Document with AutoDESK Inventor
- CADDAS 002d Case Study: Creation of 3D Exploded Projection view of an Assembly with AutoDESK Inventor
Project
- Offshore & Subsea Production Systems & Component 2D & 3D Engineering Design Case Studies
Click here to download course modules
CADDAS 003: Finite Element Analysis of Onshore, Offshore & Subsea Engineering Design Master Class with ANSYS WorkBench
Wk5: Course Modules
- Module 1: Fundamentals of Finite Element Analysis (FEA) Simulation – Mathematical Theory
- Module 2: Introduction to ANSYS Workbench Simulation & Analysis Interface
- Module 3: Basic Steps in Building Numerical Engineering Simulation Model
- Module 4: ANSYS Static & Structural Thermal & Computational Fluid Dynamics (CFD) Analysis Hands On Workshops
Technical Workshops
- CADDAS 003a: Static Structural Analysis
- CADDAS 003b: Modal Analysis
- CADDAS 003c: Eigen Buckling Analysis
- CADDAS 003d: Harmonic Response Analysis
- CADDAS 003e: Magnestostatic Analysis
- CADDAS 003f: Random Vibration Analysis
- CADDAS 003g: Response Spectrum Analysis
- CADDAS 003h: Rigid Dynamic Analysis
- CADDAS 003i: Steady State Thermal Analysis
- CADDAS 003j: Thermal Electric Analysis
- CADDAS 003k: Transient Structural Analysis
- CADDAS 003l: Transient Thermal Analysis
- CADDAS 003m: Heat Transfer & Fluid Flow Analysis
- CADDAS 003n: Computational Fluid Dynamics (CFD) Analysis
Click here to download course modules
CADDAS 004: Offshore Fixed & Floating Structures Detailed Design Master Class with SACS
Wk6 – Wk7: Course Modules
- Module 1A: Offshore Production Jacket Platform Structural Modeling & Simulation Theory based on API RP 2A
- Module 1B: Offshore Production Jacket Platform Structural Modeling & Simulation with SACS
- Module 1B1: Fixed & Floating Offshore Structures Theory
- Module 1B2: Offshore Production Jacket Platform Structural Modeling & Simulation with SACS
- Module 1B3: Starting SACS Executive and Setting up Working Environment
- Module 1B4 Case Study: Structural Modeling of Jacket, Pile and Conductor via Definition Wizard
- Module 1B5 Case Study: Offshore Production Jacket Platform Structural Modeling of Horizontal Frames
- Module 1B6 Case Study: Offshore Production Jacket Platform Structural Modeling of Deck Frames – Cellar & Main Decks
- Module 1B7 Case Study: Offshore Production Jacket Platform Structural Modeling of Joint Connection Design
- Module 1C: Offshore Production Jacket Platform Topside Design Theory Based On API-RP2G
- Module 1D: OFFSHORE Production Jacket Platform Environmental Load Analysis with SACS
- Module 1E: Offshore Production Jacket Platform In Place Analysis Theory Based On API-RP2G
- Module 2B: Offshore Production Jacket Platform Gravity Load / Weight Analysis Theory based on API RP 2A
- Module 2B: OFFSHORE Production Jacket Platform Gravity Load / Weight Analysis with SACS
- Module 3: Offshore Production Jacket Platform Static Analysis with Non Linear Foundation with SACS
- Module 4: Offshore Production Jacket Platform Basic Static Analysis
- Module 5: Offshore Jacket Single Pile Analysis For Subsea Or Offshore Structures – SACSST005 (OPTIONAL)
Reference Lecture
Module 1: Loads on Offshore Structures
- Lecture 1.0: Loads on Offshore Structures
- Lecture 1.1: Loads on Offshore Structures
- Lecture 1.2: Loads on Offshore Structures
- Lecture 1.3: Loads on Offshore Structures
- Lecture 1.4: Loads on Offshore Structures
- Lecture 1.5: Loads on Offshore Structures
- Lecture 1.6: Loads on Offshore Structures
Module 2: Concepts of Fixed Offshore Platform Deck and Jacket
- Lecture 2.0: Concepts of Fixed Offshore Platform Deck and Jacket
- Lecture 2.1: Concepts of Fixed Offshore Platform Deck and Jacket
- Lecture 2.2: Concepts of Fixed Offshore Platform Deck and Jacket
- Lecture 2.3: Concepts of Fixed Offshore Platform Deck and Jacket
- Lecture 2.4: Concepts of Fixed Offshore Platform Deck and Jacket
Module 3: Steel Tubular Member Design
- Lecture 3.0: Steel Tubular Member Design
- Lecture 3.1: Steel Tubular Member Design
- Lecture 3.2: Steel Tubular Member Design
- Lecture 3.3: Steel Tubular Member Design
- Lecture 3.4: Steel Tubular Member Design
Module 4: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.0: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.1: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.2: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.3: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.4: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.5: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.6: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.7: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.8: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.9: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.10: Tubular Joint Design for Static & Cyclic Loads
- Lecture 4.11: Tubular Joint Design for Static & Cyclic Loads
Module 5: Tubular Joint Design for Static & Cyclic Loads
- Lecture 5.0: Jackup Rigs Analysis & Design
- Lecture 5.1: Jackup Rigs Analysis & Design
- Lecture 5.2: Jackup Rigs Analysis & Design
- Lecture 5.3: Jackup Rigs Analysis & Design
- Lecture 5.4: Jackup Rigs Analysis & Design
- Lecture 6.0: Design Against Accidental Loads
- Lecture 6.1: Design Against Accidental Loads
- Lecture 6.2: Design Against Accidental Loads
- Lecture 6.3: Design Against Accidental Loads
- Lecture 6.4: Design Against Accidental Loads
- Lecture 6.5: Design Against Accidental Loads
- Lecture 6.6: Design Against Accidental Loads
- Lecture 6.7: Design Against Accidental Loads
Click here to download course modules
CADDAS 005:Onshore, Offshore & Subsea Pipeline Engineering Design Master Class with CEASAR II
Wk8 – Wk9: Course Modules
- Module 1: Fundamentals of Pipeline Engineering for Engineers
- Module 2: Fundamentals of Offshore Pipeline Engineering
- Module 3: Fundamentals of Subsea Pipeline Engineering Design
- Module 4: Pipe & Flowline Project Engineering – FEED / Construction & Installation
- Module 5: Onshore & Offshore Subsea Pipeline Ancillary Equipment
- Module 6: Onshore & Offshore Subsea Pipeline Cathodic Protection Design
- Module 7: Onshore & Offshore Subsea Pipeline Failure – External Corrosion
- Module 8: Onshore & Offshore Subsea Pipeline Performance Requirements
- Module 9: Fundamentals of Piping & Pipeline Engineering Detailed & FEED Design
- Module 10: Onshore & Offshore Pipeline Stress Analysis with CEASAR II
- Module 11: CAESAR II Static Load Case Editor Theory
Technical Workshop
- CADDAS 005.1a: Onshore Pipe Stress Analysis with CAESAR II
- CADDAS 005.1b: Fundamentals of Fatigue Analysis of Piping System using CAESAR II
- CADDAS 005.1c: Theoretical Methodology of Piping System Fatigue Analysis with CAESAR II
- CADDAS 005.1d: Case Study Piping System Fatigue Analysis using CAESAR II
- CADDAS 005b1: CEASAR II Onshore & Offshore Stress Analysis Of Gas Transmission Pipeline (Buried & Unburied) Hands On Training For Intermediate Onshore, Offshore & Subsea Pipeline Engineer (Optional)
- CADDAS 005c1: CEASAR II Stress And Fatigue Analysis Of Offshore Steel Catenary Riser (SCR)Hands On Training For Intermediate Offshore & Subsea Pipeline Engineer (Optional)
Click here to download course modules
CADDAS 006: Subsea Controls, Hydraulics, SURFs & Subsea Structures Installations Master Class
Wk10 – Wk11: Course Modules
- Module 1: Subsea Controls & Systems Hydraulic Sizing
- Module 2: Extended Brown Field Tie Back Development & Field Hydraulic Sizing
Workshop - Module 3: Engineering of Subsea Umbilical & Controls
- Module 4: FEED & Detailed Design & Verification of Subsea Umbilicals, Risers &
Flowlines (SURFs) - Module 5: Flexible Pipe (SURFS) Fatigue Life Assessment using Miner Palmgren Equation
Technical Workshops
- CADDAS006a1:Deepwater Dynamic Umbilical Design
- CADDAS 006a: Verification of Flexible Riser Design Workshop
- CADDAS 006b: Subsea Structures & Installation Calculations Workshop
Click here to download course modules
CADDAS 007: Subsea & Hydrodynamic Engineering (Moorings, Riser, Subsea Installation, Calm Bouy, Stinger) Simulation Analysis Master Class
Wk12 – Wk13: Course Modules
- Module 1: Introduction to Floating Systems, Riser & Hydraulic Engineering
- Module 2: FPSO Drift & Excursion Practical Calculation Workshop
- Module 3: Mooring Lines, Riser & Subsea Installation Analysis & Simulation with ORCAFLEX
Technical Workshop
- CADDAS 007.1: ORCAFLEX Workshop Introduction
- CADDAS 007.2: Orcaflex Workshop – Steel Catenary Riser
- CADDAS 007.3: Orcaflex Workshop – Single Point Mooring
- CADDAS 007.4: Orcaflex Workshop – Riser Installation – Pull In Analysis
- CADDAS 007.5: Orcaflex Workshop – Lay On Tower Analysis
Click here to download course modules
CADDAS 008: Subsea Field Development, Systems Integration, Flow Assurance & Asset Integrity Management From Field Life Cycle Perspective Master Class
Wk13 – Wk16: Course Modules
- Module 1: Subsea Field Development & Systems Integration (Case Study)
- Module 2: Subsea Flow Assurance Issues
- Module 3: Drilling Subsea Wellhead & MUX BOP Control System
- Module 4: Subsea Christmas Trees & Functions
- Module 5: Subsea Manifolds & Well Clusters
- Module 6: Subsea Systems Reliability Engineering (Optional)
- Module 7: Subsea Processing & Boosting Technologies
- Module 8: Deepwater Diving Field Operations for Divers & Subsea Engineers
- Module 9: FPSO & Associated Subsea System Facilities Asset Integrity Assessment and Management (Case Study)
- Module 10: Subsea Manifold Structural Design, Verification, and Validation
- Module 11: Pre Commissioning, Commissioning, Hook Ups & Decommission of FPSO’S & Offshore Structures
Click here to download course modules
TRAINING CERTIFICATION
Issued directly by Chess Subsea Engineering Europe.
To be certified by OPITO and City & Guilds internationally; please note that certification fees and online assessment apply.
Core assessment areas & certifications to be awarded by OPITO and City & Guilds are as follows:
- Subsea Technology
- Subsea Equipment and Tools
- Material Technologies, Subsea Systems and Flow Assurance
- Subsea Controls
- ROV Systems
Kindly contact us directly on info@chesssubseaengineering.com.
TRAINING METHODOLOGY
Minimum of two (2) and maximum of (3) days intensive class room training with practical case study to be submitted weekly for competence assessment.
All the trainings & workshops are interactive and include the following training methodologies as a percentage of the total tuition hours:-
15% Lectures
5% Workshops & Work Presentations
75% Case Study Software Hands
5% Videos & General Discussions
COURSE TRAINING FEES
N 385,000 Naira Online & N 675,000 Naira Offline. Part payment of 50% acceptable with full payment made prior to course finish date.
See Payment Breakdown Structure four (4) months:
Wk1-Wk4: 50%
Wk4-Wk8: 75%
Wk8:Wk12: 85%
Wk12:Wk16: 100%
HOW TO REGISTER:
Click HERE to download registration booklet on MSWORD. Fill in your details and return to trainingnigerians@chesssubseaengineering.com
For all inquiries please call +447946739882, +447903310642, + 2348151453146, +2348139340494 or send email to: trainings@chesssubseaengineering.com, info@chesssubseaengineering.com, trainingnigerians@chesssubseaengineering.com
BANK ACCOUNT DETAILS
All payment with regards to trainings should be made to the following account below:
CHESS SUBSEA ENGINEERING, NIGERIA
FIRST BANK OF NIGERIA PLC
ACCOUNT NO: 2031711533 (CURRENT)
CADDAS ENGINEERING TECHNICAL TRAINING DESIGN GALLERY
